|
|
|
1
|
Once your working distance is set you should not _________ it
|
|
2
|
The micromanipulator is located in the _______ cart
|
|
3
|
Once your microscope is focused in the location you want it, you need to ensure your _________ _______ is the same on your micromanipulator and microscope.
|
|
5
|
Before draping the micromanipulator the drape holding bracket must be applied by __________ the grooves of the bracket up the outer sides of the micromanipulator and tightening the bracket knobs
|
|
6
|
To remove micromanipulator from microscope loosen the holding screw, ______ the release lever and slide the micromanipulator up and out
|
|
7
|
The test fire should take place ________ the patient is in the room
|
|
9
|
The clear plastic tubing that is wrapped around the laser arm attaches to the micromanipulator and to the _______ machine
|
|
13
|
The laser should be in ___________ mode when the surgeon eyes are no longer looking through the microscope
|
|
14
|
To connect the laser to the micromanipulator attach the threaded lens adapter to the distal end of the laser arm ______, then to the entry port on the micromanipulator
|
|
18
|
To re-focus the microscope after your working distance has been locked in you need to _______ the head of the microscope back and forth until operative field is in clear view
|
|
19
|
To lock the working distance in on the micromanipulator you need to secure the working distance lock _________
|
|
|
